TrippLite SMART1500
Details
Tripp Lite's SMART1500 intelligent, line interactive UPS system protects servers, networking accessories and telecommunications equipment from blackouts, voltage fluctuations and transient surges.
Large internal batteries offer 20 minutes half load runtime and 7 minutes at full load during power failures. 1500VA / 980 watt power handling capability supports a variety of networking, telecom and various other application types, including the support of multiple network workstations.
Includes a total of 6 outlets, 1 of which can be individually powered on and off via software interface to selectively reboot remote equipment or to automatically shed less significant loads to extend battery runtime for more critical equipment.
Supports remote monitoring of UPS and site power conditions via built-in USB and DB9 monitoring ports.
Includes PowerAlert UPS monitoring and unattended shutdown software with complete cabling. Supports SNMP with optional SNMPWEBSOLO external adapter.
Built-in audible alarm and 5 front panel LEDs indicate status of line power, battery power, battery low/replace, voltage regulation and load level. Wall mountable with optional UPSWM wallmount bracket. Network-grade AC surge suppression protects equipment from damage and performance problems resulting from transient surges.
Attractive, small-footprint tower housing uses less than 66 square inches of floor or desktop space.
OUTPUT | |
|---|---|
| Output Volt Amp Capacity (VA) | 1500 |
| Output kVA Capacity (kVA) | 1.5 |
| Output Watt Capacity (Watts) | 980 |
| Power Factor | 0.7 |
| Nominal Output Voltage(s) Supported | 120V |
| Frequency Compatibility | 60 Hz |
| Output Voltage Regulation (Line Mode) | -18%, +8% |
| Output Voltage Regulation (Battery Mode) | +/- 5% |
| Output Receptacles | (6) 5-15R |
| Load Management Receptacles | One switchable single-outlet 5-15R load bank |
| Output AC Waveform (AC Mode) | Sine wave |
| Output AC Waveform (Battery Mode) | PWM sine wave |
INPUT | |
|---|---|
| Rated input current (Maximum Load) | 12A |
| Nominal Input Voltage(s) Supported | 120V AC |
| UPS Input Connection Type | 5-15P |
| Input Circuit Breakers | 15A |
| UPS Input Cord Length (ft.) | 6 |
| UPS Input Cord Length (m) | 1.8 |
| Recommended Electrical Service | 15A 120V |
| Input Phase | Single-Phase |
BATTERY | |
|---|---|
| Full Load Runtime (min.) | 7 min. (980w) |
| Half Load Runtime (min.) | 20 min. (490w) |
| DC System Voltage (VDC) | 36 |
| Battery Recharge Rate (Included Batteries) | Less than 4 hours from 10% to 90% (typical, full load discharge) |
-
Josiah Smith review Review by Josiah Smith
Rating My company needed the and got to John Day, Oregon faster than we had hoped. We will order again soon. (Posted on 5/6/2019)
WRITE YOUR REVIEW
Write Your Own Review
Features
Details
Tripp Lite's SMART1500 intelligent, line interactive UPS system protects servers, networking accessories and telecommunications equipment from blackouts, voltage fluctuations and transient surges.
Large internal batteries offer 20 minutes half load runtime and 7 minutes at full load during power failures. 1500VA / 980 watt power handling capability supports a variety of networking, telecom and various other application types, including the support of multiple network workstations.
Includes a total of 6 outlets, 1 of which can be individually powered on and off via software interface to selectively reboot remote equipment or to automatically shed less significant loads to extend battery runtime for more critical equipment.
Supports remote monitoring of UPS and site power conditions via built-in USB and DB9 monitoring ports.
Includes PowerAlert UPS monitoring and unattended shutdown software with complete cabling. Supports SNMP with optional SNMPWEBSOLO external adapter.
Built-in audible alarm and 5 front panel LEDs indicate status of line power, battery power, battery low/replace, voltage regulation and load level. Wall mountable with optional UPSWM wallmount bracket. Network-grade AC surge suppression protects equipment from damage and performance problems resulting from transient surges.
Attractive, small-footprint tower housing uses less than 66 square inches of floor or desktop space.
OUTPUT | |
|---|---|
| Output Volt Amp Capacity (VA) | 1500 |
| Output kVA Capacity (kVA) | 1.5 |
| Output Watt Capacity (Watts) | 980 |
| Power Factor | 0.7 |
| Nominal Output Voltage(s) Supported | 120V |
| Frequency Compatibility | 60 Hz |
| Output Voltage Regulation (Line Mode) | -18%, +8% |
| Output Voltage Regulation (Battery Mode) | +/- 5% |
| Output Receptacles | (6) 5-15R |
| Load Management Receptacles | One switchable single-outlet 5-15R load bank |
| Output AC Waveform (AC Mode) | Sine wave |
| Output AC Waveform (Battery Mode) | PWM sine wave |
INPUT | |
|---|---|
| Rated input current (Maximum Load) | 12A |
| Nominal Input Voltage(s) Supported | 120V AC |
| UPS Input Connection Type | 5-15P |
| Input Circuit Breakers | 15A |
| UPS Input Cord Length (ft.) | 6 |
| UPS Input Cord Length (m) | 1.8 |
| Recommended Electrical Service | 15A 120V |
| Input Phase | Single-Phase |
BATTERY | |
|---|---|
| Full Load Runtime (min.) | 7 min. (980w) |
| Half Load Runtime (min.) | 20 min. (490w) |
| DC System Voltage (VDC) | 36 |
| Battery Recharge Rate (Included Batteries) | Less than 4 hours from 10% to 90% (typical, full load discharge) |
Reviews
-
Josiah Smith review Review by Josiah Smith
Rating My company needed the and got to John Day, Oregon faster than we had hoped. We will order again soon. (Posted on 5/6/2019)
WRITE YOUR REVIEW
Write Your Own Review
© 2008 - 2020 iBuy Stores, Inc. All Rights Reserved.
Due to Prop 65 restrictions, we have a selected product offering to the state of CA at this time. As we get additional compliance confirmations from our manufacturers we will feature more product lines for availability. Contact us for more information. ⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.govWe Accept
