TrippLite SMART1200XLHG
Details
Tripp Lite SMART1200XLHG offers medical-grade UPS protection with built-in line interactive voltage regulation, expandable battery runtime and intelligent monitoring with unattended shutdown capability.
Built-in isolation transformer with faraday shield offers full line isolation and removes common mode noise while maintaining full AC surge suppression in all modes.
Includes: high quality hospital grade plug and outlets.
Resistant to electrostatic discharge.
1000VA power handling capacity supports computers, internetworking equipment and other critical loads during commercial power failures.
External battery connector allows configuration for up to several hours of runtime during power failures by adding one or more external battery packs (part# BP36V27).
Line interactive voltage regulation corrects brownouts as low as 81V and overvoltages as high as 143V back to normal 120V levels, saving battery reserves for use only during complete power failures. Includes diagnostic LEDs and 2 built-in communications ports (1-RS-232, 1-USB) that work with included PowerAlert Software and cabling to provide automatic unattended shutdown of connected network and PC applications.
OUTPUT | |
---|---|
Output Volt Amp Capacity (VA) | 1000 |
Output kVA Capacity (kVA) | 1 |
Output Watt Capacity (Watts) | 750 |
Power Factor | 0.8 |
Nominal Output Voltage(s) Supported | 115V; 120V |
Frequency Compatibility | 60 Hz |
Output Voltage Regulation (Line Mode) | -18%, +8% |
Output Voltage Regulation (Battery Mode) | 115V (+/- 5%) |
Output Receptacles | (4) 5-15R |
Output Receptacle Details | Hospital grade output receptacles |
Output AC Waveform (AC Mode) | Sine wave |
Output AC Waveform (Battery Mode) | PWM sine wave |
INPUT | |
---|---|
Rated input current (Maximum Load) | 9.2A |
Nominal Input Voltage(s) Supported | 120V AC |
UPS Input Connection Type | 5-15P-HG |
Input Circuit Breakers | 15A |
UPS Input Cord Length (ft.) | 6 |
UPS Input Cord Length (m) | 1.8 |
Recommended Electrical Service | 15A 120V |
Input Phase | Single-Phase |
BATTERY | |
---|---|
Full Load Runtime (min.) | 10 min. (750w) |
Half Load Runtime (min.) | 28 min. (375w) |
Expandable Battery Runtime | Extended runtime supported via optional external battery packs |
-
Kevin Wingert review Review by Kevin Wingert
Rating Trying to find parts in Seaside, Oregon is not easy, but we found the , but your team had it ready to ship. (Posted on 5/6/2019)
WRITE YOUR REVIEW
Write Your Own Review
Features
Details
Tripp Lite SMART1200XLHG offers medical-grade UPS protection with built-in line interactive voltage regulation, expandable battery runtime and intelligent monitoring with unattended shutdown capability.
Built-in isolation transformer with faraday shield offers full line isolation and removes common mode noise while maintaining full AC surge suppression in all modes.
Includes: high quality hospital grade plug and outlets.
Resistant to electrostatic discharge.
1000VA power handling capacity supports computers, internetworking equipment and other critical loads during commercial power failures.
External battery connector allows configuration for up to several hours of runtime during power failures by adding one or more external battery packs (part# BP36V27).
Line interactive voltage regulation corrects brownouts as low as 81V and overvoltages as high as 143V back to normal 120V levels, saving battery reserves for use only during complete power failures. Includes diagnostic LEDs and 2 built-in communications ports (1-RS-232, 1-USB) that work with included PowerAlert Software and cabling to provide automatic unattended shutdown of connected network and PC applications.
OUTPUT | |
---|---|
Output Volt Amp Capacity (VA) | 1000 |
Output kVA Capacity (kVA) | 1 |
Output Watt Capacity (Watts) | 750 |
Power Factor | 0.8 |
Nominal Output Voltage(s) Supported | 115V; 120V |
Frequency Compatibility | 60 Hz |
Output Voltage Regulation (Line Mode) | -18%, +8% |
Output Voltage Regulation (Battery Mode) | 115V (+/- 5%) |
Output Receptacles | (4) 5-15R |
Output Receptacle Details | Hospital grade output receptacles |
Output AC Waveform (AC Mode) | Sine wave |
Output AC Waveform (Battery Mode) | PWM sine wave |
INPUT | |
---|---|
Rated input current (Maximum Load) | 9.2A |
Nominal Input Voltage(s) Supported | 120V AC |
UPS Input Connection Type | 5-15P-HG |
Input Circuit Breakers | 15A |
UPS Input Cord Length (ft.) | 6 |
UPS Input Cord Length (m) | 1.8 |
Recommended Electrical Service | 15A 120V |
Input Phase | Single-Phase |
BATTERY | |
---|---|
Full Load Runtime (min.) | 10 min. (750w) |
Half Load Runtime (min.) | 28 min. (375w) |
Expandable Battery Runtime | Extended runtime supported via optional external battery packs |
Reviews
-
Kevin Wingert review Review by Kevin Wingert
Rating Trying to find parts in Seaside, Oregon is not easy, but we found the , but your team had it ready to ship. (Posted on 5/6/2019)