TrippLite APSX1012SW

TrippLite APSX1012SW

TrippLite Power Products

  • $ 93500
  • Save $ 48600

Clean Pure Sine Wave output

  • 12V DC or 230V AC input; 230V, 50 Hz output (hardwired)
  • 1000 watts continuous output, 2000 watts peak output
  • Selectable 4/40 amp wet/dry cell battery charger
  • Quiet, high efficiency operation, high surge capacity and low idle current
  • Seamless transfer switching
  • PowerVerter APS INT 1000W 12VDC 230V Inverter/Charger with Pure Sine Wave Output, Hardwired


    Frequency Compatibility 50 Hz
    Output Receptacles Hardwire
    Output (Watts) 1000
    Continuous Output Capacity (Watts) 1000
    Peak Output Capacity (Watts) 2000
    Output Nominal Voltage 230V
    Output Voltage Regulation Nominal 230v +/- 5% until LBW. Peak coltage 360v
    Output Frequency Regulation 50/60 Hz (+/- 0.5 Hz)
    Overload Protection Includes 15A input breaker dedicated to the charging system and 15A output breaker for AC output loads


    Nominal Input Voltage(s) Supported 230V AC
    Recommended Electrical Service DC INPUT: Requires 12VDC input source capable of delivering 240A for the required duration (when used at full continuous capacity - DC requirements increase during OverPower and DoubleBoost operation). For automotive applications, professional hardwire installation with 400A minimum battery system fusing is recommended.
    Maximum Input Amps / Watts DC INPUT: Full continuous load - 240A at 12VDC. AC INPUT: 17 amps at 230VAC with full inverter and charger load (8.7A max charger-only / combined input load to support charger and AC output is automatically controllable to 66%-33%-0% based on AC output loading using the charger limiting set points - see manual for setting instructions)
    Input Connection Type DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: Hardwire via built in junction box with cover plate
    Voltage Compatibility (VAC) 230
    Voltage Compatibility (VDC) 12

    We Also Recommend