Inverters
Outback FX2012T Sealed Off-Grid Turbo Included
Details
The OutBack FX inverter/charger system is designed for both residential and commercial stand-alone and utility-interactive applications with battery energy storage.
The OutBack FX Inverter is a modular "building block" sine wave inverter/charger which can be used for both small and large power systems.
Every OutBack FX inverter/charger module is a total power conversion system - DC to AC inverter, battery charger and AC transfer switch.
Additional inverter/chargers can be connected at any time in parallel (120 VAC), series (120/240 VAC), or even three-phase (120Y208VAC) configurations. This allows the sytem to be tailored to the specific power conversion requirements of the application, both at the time of the installation and in the future.
Specs:
Continuous Output Power: 20000 VA
Continuous Output Current at 25 degrees: 17 amps AC RMS
Idle Power (120 VAC Output No Load): 19-21W DC
Output Voltage: 120 VAC/60 Hz
DC Input Voltage (Nominal): 12 VDC
Peak Efficiency: 91%
Output Voltage Regulation: +/-2% typical
Continuous DC Charge Rate: 100 Amps DC
Frequency Range: 50-70 Hz
DC Input Voltage Range: 10-16 VDC
Dimensions (LxWxH): 21.6 x 12.75 x 15.5 (inches)
Shipping Weight: 66 lbs.
The OutBack FX Inverter is a modular "building block" sine wave inverter/charger which can be used for both small and large power systems.
Every OutBack FX inverter/charger module is a total power conversion system - DC to AC inverter, battery charger and AC transfer switch.
Additional inverter/chargers can be connected at any time in parallel (120 VAC), series (120/240 VAC), or even three-phase (120Y208VAC) configurations. This allows the sytem to be tailored to the specific power conversion requirements of the application, both at the time of the installation and in the future.
Specs:
Continuous Output Power: 20000 VA
Continuous Output Current at 25 degrees: 17 amps AC RMS
Idle Power (120 VAC Output No Load): 19-21W DC
Output Voltage: 120 VAC/60 Hz
DC Input Voltage (Nominal): 12 VDC
Peak Efficiency: 91%
Output Voltage Regulation: +/-2% typical
Continuous DC Charge Rate: 100 Amps DC
Frequency Range: 50-70 Hz
DC Input Voltage Range: 10-16 VDC
Dimensions (LxWxH): 21.6 x 12.75 x 15.5 (inches)
Shipping Weight: 66 lbs.
Weight: | 1 |
-
Gaylord Acosta review Review by Gaylord Acosta
Rating It was great how the part# shipped direct to our location in New Glarus, Wisconsin. (Posted on 5/6/2019)
WRITE YOUR REVIEW
Write Your Own Review
Features
Details
The OutBack FX inverter/charger system is designed for both residential and commercial stand-alone and utility-interactive applications with battery energy storage.
The OutBack FX Inverter is a modular "building block" sine wave inverter/charger which can be used for both small and large power systems.
Every OutBack FX inverter/charger module is a total power conversion system - DC to AC inverter, battery charger and AC transfer switch.
Additional inverter/chargers can be connected at any time in parallel (120 VAC), series (120/240 VAC), or even three-phase (120Y208VAC) configurations. This allows the sytem to be tailored to the specific power conversion requirements of the application, both at the time of the installation and in the future.
Specs:
Continuous Output Power: 20000 VA
Continuous Output Current at 25 degrees: 17 amps AC RMS
Idle Power (120 VAC Output No Load): 19-21W DC
Output Voltage: 120 VAC/60 Hz
DC Input Voltage (Nominal): 12 VDC
Peak Efficiency: 91%
Output Voltage Regulation: +/-2% typical
Continuous DC Charge Rate: 100 Amps DC
Frequency Range: 50-70 Hz
DC Input Voltage Range: 10-16 VDC
Dimensions (LxWxH): 21.6 x 12.75 x 15.5 (inches)
Shipping Weight: 66 lbs.
The OutBack FX Inverter is a modular "building block" sine wave inverter/charger which can be used for both small and large power systems.
Every OutBack FX inverter/charger module is a total power conversion system - DC to AC inverter, battery charger and AC transfer switch.
Additional inverter/chargers can be connected at any time in parallel (120 VAC), series (120/240 VAC), or even three-phase (120Y208VAC) configurations. This allows the sytem to be tailored to the specific power conversion requirements of the application, both at the time of the installation and in the future.
Specs:
Continuous Output Power: 20000 VA
Continuous Output Current at 25 degrees: 17 amps AC RMS
Idle Power (120 VAC Output No Load): 19-21W DC
Output Voltage: 120 VAC/60 Hz
DC Input Voltage (Nominal): 12 VDC
Peak Efficiency: 91%
Output Voltage Regulation: +/-2% typical
Continuous DC Charge Rate: 100 Amps DC
Frequency Range: 50-70 Hz
DC Input Voltage Range: 10-16 VDC
Dimensions (LxWxH): 21.6 x 12.75 x 15.5 (inches)
Shipping Weight: 66 lbs.
Specifications
Weight: | 1 |
Reviews
-
Gaylord Acosta review Review by Gaylord Acosta
Rating It was great how the part# shipped direct to our location in New Glarus, Wisconsin. (Posted on 5/6/2019)