Pressure Washers
Mi-T-M 3000 PSI Electric Belt Drv Hot Water Pres-Washer HAE-3004-0E4G
Details
- Pump
- Factory preset unloader
- Stainless-steel and brass unloader valve
- Forged brass manifold
- Thermal relief valve
- Motor
- Open drip-proof electric motor (2500-PSI model)
- Totally enclosed fan-cooled electric motor with manual thermaloverload protection (3000-PSI model)
- On/Off power switch
- Frame
- Stainless-steel base and frame with rubber isolators
- Component
- Time delay shutdown
- Heat Exchanger
- Used for consistent and efficient on-demand hot water
- 120?F to 130?F temperature rise above in-take water, obtained within 3 to 5 minutes
- Adjustable thermostat
- On/Off power switch
- Powder coated steel frame
- Revolutionary cartridge design
- Low maintenance, stainless-steel coils in aluminum casings for maximum efficiencies
- Eliminates constant cleaning
- Eliminates heat loss
- Unit Includes:
- Quick connect nozzles ? 0?, 15?, 25? and 40?
- External downstream detergent injector, AW-8400-0021, with detergent nozzle
- 50-foot x 3 ?8-inch high pressure black hose with quick connects, 5800-PSI rated, R2
- Insulated trigger gun with safety lock-off
- Adjustable pressure insulated dual lance
| Pump: | General Pumps |
| Power Type: | Electric |
| Motor (HP): | 8.0 HP, 460V, 3-Phase |
| Pump Pressure(psi): | 3000 PSI |
| Water Flow Rate: | 3.9 GPM |
| Cleaning Units: | 11700 CU |
| Width: | 25 in |
| Length: | 36 in. |
| Height: | 49 in |
| Weight: | 725 lb |
-
Edgar Xavier review Review by Edgar Xavier
Rating Being from Welch, West Virginia made it hard to find parts like the . Thanks for shipping it out the same day! (Posted on 5/6/2019)
WRITE YOUR REVIEW
Write Your Own Review
Features
Details
- Pump
- Factory preset unloader
- Stainless-steel and brass unloader valve
- Forged brass manifold
- Thermal relief valve
- Motor
- Open drip-proof electric motor (2500-PSI model)
- Totally enclosed fan-cooled electric motor with manual thermaloverload protection (3000-PSI model)
- On/Off power switch
- Frame
- Stainless-steel base and frame with rubber isolators
- Component
- Time delay shutdown
- Heat Exchanger
- Used for consistent and efficient on-demand hot water
- 120?F to 130?F temperature rise above in-take water, obtained within 3 to 5 minutes
- Adjustable thermostat
- On/Off power switch
- Powder coated steel frame
- Revolutionary cartridge design
- Low maintenance, stainless-steel coils in aluminum casings for maximum efficiencies
- Eliminates constant cleaning
- Eliminates heat loss
- Unit Includes:
- Quick connect nozzles ? 0?, 15?, 25? and 40?
- External downstream detergent injector, AW-8400-0021, with detergent nozzle
- 50-foot x 3 ?8-inch high pressure black hose with quick connects, 5800-PSI rated, R2
- Insulated trigger gun with safety lock-off
- Adjustable pressure insulated dual lance
Specifications
| Pump: | General Pumps |
| Power Type: | Electric |
| Motor (HP): | 8.0 HP, 460V, 3-Phase |
| Pump Pressure(psi): | 3000 PSI |
| Water Flow Rate: | 3.9 GPM |
| Cleaning Units: | 11700 CU |
| Width: | 25 in |
| Length: | 36 in. |
| Height: | 49 in |
| Weight: | 725 lb |
Reviews
-
Edgar Xavier review Review by Edgar Xavier
Rating Being from Welch, West Virginia made it hard to find parts like the . Thanks for shipping it out the same day! (Posted on 5/6/2019)
WRITE YOUR REVIEW
Write Your Own Review
© 2008 - 2020 iBuy Stores, Inc. All Rights Reserved.
Due to Prop 65 restrictions, we have a selected product offering to the state of CA at this time. As we get additional compliance confirmations from our manufacturers we will feature more product lines for availability. Contact us for more information. ⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.govWe Accept
