Generators

Winco PSS90 90kW Gaseous Standby Generator

$25,500.00

In stock

SKU: WIN0052


A key part of any generator is the fuel system. If the engine is starved or flooded, the governor is unable to maintain the proper speed resulting in large voltage and frequency variations. The WINCO PSS90 and all other WINCO emergency standby generator models include industrial features to ensure that your emergency generator will start and perform to specification when your family or business needs it. To control the fuel supply and prevent dangerous fuel leaks WINCO utilizes dual ASCO normally closed solenoids. WINCO uses ASCO valves designed to properly operate in cold temperatures to increase generator reliability. The GM engines include a dynamically controlled valve and fuel mixer that ensures the ideal fuel to air ratio is always achieved to maximize performance while minimizing emissions. The engines also include electronic governors capable of quickly and accurately adjusting the engine speed to maintain the most consistent electrical output possible through a wide range of load conditions.

Details

  • Industrial GM 5.7L Turbo-Charged After-Cooled V-8 engine.
  • Liquid-cooled design extends life of generator over air-cooled models.
  • 1800 RPM operation is more fuel efficient and is quieter.
  • Field selectable between NG and LP gas with the flip of a switch.
  • Industrial grade Stamford generator ends.
  • Automatic Voltage Regulator provides +/-1% regulation.
  • Available in all common voltages.
  • Optional generator strip heater (reduces condensation) and Excitation Boost System (improves motor starting) are available.
  • Complete digital instrumentation monitors and displays engine and generator operating parameters.
  • Safety shutdowns are configured to protect the generator and load from conditions that can cause expensive repairs.
  • Programmable inputs and outputs allow the generator to easily integrate into larger systems.
  • NFPA 110 configurations are available.
  • All alarms are visually annunciated on the front panel.
  • A 250 event log records important events to aid in troubleshooting and repair.
  • Galvanneal steel enclosure is strong, corrosion resistant and quiet.
  • Critical grade muffler reduces noise output.
  • Side panels are completely removable to provide complete access to engine for routine maintenance.
  • Oil and coolant drain extensions are included standard.
  • Generator is shipped wet.
  • 100% load tested.
  • Exercise mode is at full speed to properly verify generator electrical performance. ETL listed to UL Std 2200..
Model Number: PSS90
Manufacturer Number: ULPSS90-3
Power Type: 120/240 Volt 1 PH
Fuel Type: Gasoline / Natural Gas -Field Selectable
Engine starter: Electric
Max Wattage: 90 KWatts
Continuous Watts: 80 KWatts
Continuous Amps: 333 Amps
Height: 51.9 in
Width: 36.45 in
Length: 102.5 in
Weight: 2390 lbs
  1. Be the first to review this product

WRITE YOUR REVIEW

Write Your Own Review

You're reviewing: Winco PSS90 90kW Gaseous Standby Generator

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Quality

Features

Details

  • Industrial GM 5.7L Turbo-Charged After-Cooled V-8 engine.
  • Liquid-cooled design extends life of generator over air-cooled models.
  • 1800 RPM operation is more fuel efficient and is quieter.
  • Field selectable between NG and LP gas with the flip of a switch.
  • Industrial grade Stamford generator ends.
  • Automatic Voltage Regulator provides +/-1% regulation.
  • Available in all common voltages.
  • Optional generator strip heater (reduces condensation) and Excitation Boost System (improves motor starting) are available.
  • Complete digital instrumentation monitors and displays engine and generator operating parameters.
  • Safety shutdowns are configured to protect the generator and load from conditions that can cause expensive repairs.
  • Programmable inputs and outputs allow the generator to easily integrate into larger systems.
  • NFPA 110 configurations are available.
  • All alarms are visually annunciated on the front panel.
  • A 250 event log records important events to aid in troubleshooting and repair.
  • Galvanneal steel enclosure is strong, corrosion resistant and quiet.
  • Critical grade muffler reduces noise output.
  • Side panels are completely removable to provide complete access to engine for routine maintenance.
  • Oil and coolant drain extensions are included standard.
  • Generator is shipped wet.
  • 100% load tested.
  • Exercise mode is at full speed to properly verify generator electrical performance. ETL listed to UL Std 2200..

Specifications

Model Number: PSS90
Manufacturer Number: ULPSS90-3
Power Type: 120/240 Volt 1 PH
Fuel Type: Gasoline / Natural Gas -Field Selectable
Engine starter: Electric
Max Wattage: 90 KWatts
Continuous Watts: 80 KWatts
Continuous Amps: 333 Amps
Height: 51.9 in
Width: 36.45 in
Length: 102.5 in
Weight: 2390 lbs

Reviews

  1. Be the first to review this product

WRITE YOUR REVIEW

Write Your Own Review

You're reviewing: Winco PSS90 90kW Gaseous Standby Generator

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Quality

Make An Offer

We are often running unadvertised sale prices, rebates & special offers. We invite you to make a reasonable counter-offer at any time for any item. Who knows? - this may be your lucky day! We'll do our best to help you any way we can.