TrippLite Power

TrippLite ISOBLOK2-0

$169.00

In stock

SKU: TPT0088


The TrippLite ISOBLOK2-0 ships factory direct to your door.

Details

Tripp Lite Isolator series UL2601-1 listed Hospital Grade isolation transformers offer line isolation, continuous noise filtering and enhanced common mode surge suppression.

Internal low-impedance isolation transformer component offers 100% isolation from the input AC line. Full UL2601-1 medical grade listing with hospital-grade plug and outlet receptacles makes Isolator Hospital Grade transformers ideal for the protection of sensitive electronic equipment in patient-care areas.
Isolation transformer with Faraday shield reduces the cumulative leakage current of the Isolator and connected equipment to levels below 300 microamps. Secondary neutral to ground bonding virtually eliminates common mode noise, providing an isolated neutral-ground reference for sensitive equipment and an inexpensive alternative to the installation of dedicated circuits and site electrical upgrades.
Removes EMI/RFI noise, utility switching transients, and harmonics generated by other on-site loads and utility or lightning related surge conditions.
Additional surge suppression components placed at the line input and output combined with full line isolation offers continuous filtering of a full range of power line noise in all modes.
Active transformer filtering offers continuous common-mode noise rejection with no wearable parts, uniquely able to reduce surges in the worst of power environments to harmless levels. Reduces 6000V IEEE587 Cat A&B ring wave and combination wave test surges to only 0.5V common mode. Model IS500HG includes 4 widely spaced NEMA5-15R hospital grade output receptacles, a 6-ft power cord, hospital grade input plug, circuit breaker overload protection and lighted power switch.
Rugged all-metal unit housing ships ready for placement in any industrial, medical, office or network environment.

  • OVERVIEW

  • Efficiency 96%
  • Let-through Voltage (Combination Wave) L-N: 250V L-G: 250V N-G: 0.5V
  • Let-through Voltage (Ring Wave) L-N: 20V L-G: 20V N-G: 0.5V
  • Noise Suppression Rating 35-65 DB
  • Nominal Voltage / Frequency 120 /60Hz
  • Over Current Protection 1 X THERMAL, 2 POLE, ROCKER
  • Shipping Weight 22.20 lbs
  • Total Harmonic Distortion Less than 1%
  • VA / Watt Capacity 500
  • Transformer Type Medical-grade, low impedance transformer-based line isolation transformer
  • OUTPUT

  • Output Receptacles (4) 5-15R-HG
  • Ouput Amp Capacity 4.2
  • INPUT

  • Input Cord Length (ft.) 10
  • Input Cord Length (m) 3.05
  • Input Plug Type NEMA 5-15P-HG
    1. Be the first to review this product

    WRITE YOUR REVIEW

    Write Your Own Review

    You're reviewing: TrippLite ISOBLOK2-0

    How do you rate this product? *

      1 star 2 stars 3 stars 4 stars 5 stars
    Quality

    Features

    Details

    Tripp Lite Isolator series UL2601-1 listed Hospital Grade isolation transformers offer line isolation, continuous noise filtering and enhanced common mode surge suppression.

    Internal low-impedance isolation transformer component offers 100% isolation from the input AC line. Full UL2601-1 medical grade listing with hospital-grade plug and outlet receptacles makes Isolator Hospital Grade transformers ideal for the protection of sensitive electronic equipment in patient-care areas.
    Isolation transformer with Faraday shield reduces the cumulative leakage current of the Isolator and connected equipment to levels below 300 microamps. Secondary neutral to ground bonding virtually eliminates common mode noise, providing an isolated neutral-ground reference for sensitive equipment and an inexpensive alternative to the installation of dedicated circuits and site electrical upgrades.
    Removes EMI/RFI noise, utility switching transients, and harmonics generated by other on-site loads and utility or lightning related surge conditions.
    Additional surge suppression components placed at the line input and output combined with full line isolation offers continuous filtering of a full range of power line noise in all modes.
    Active transformer filtering offers continuous common-mode noise rejection with no wearable parts, uniquely able to reduce surges in the worst of power environments to harmless levels. Reduces 6000V IEEE587 Cat A&B ring wave and combination wave test surges to only 0.5V common mode. Model IS500HG includes 4 widely spaced NEMA5-15R hospital grade output receptacles, a 6-ft power cord, hospital grade input plug, circuit breaker overload protection and lighted power switch.
    Rugged all-metal unit housing ships ready for placement in any industrial, medical, office or network environment.

  • OVERVIEW

  • Efficiency 96%
  • Let-through Voltage (Combination Wave) L-N: 250V L-G: 250V N-G: 0.5V
  • Let-through Voltage (Ring Wave) L-N: 20V L-G: 20V N-G: 0.5V
  • Noise Suppression Rating 35-65 DB
  • Nominal Voltage / Frequency 120 /60Hz
  • Over Current Protection 1 X THERMAL, 2 POLE, ROCKER
  • Shipping Weight 22.20 lbs
  • Total Harmonic Distortion Less than 1%
  • VA / Watt Capacity 500
  • Transformer Type Medical-grade, low impedance transformer-based line isolation transformer
  • OUTPUT

  • Output Receptacles (4) 5-15R-HG
  • Ouput Amp Capacity 4.2
  • INPUT

  • Input Cord Length (ft.) 10
  • Input Cord Length (m) 3.05
  • Input Plug Type NEMA 5-15P-HG
  • Reviews

    1. Be the first to review this product

    WRITE YOUR REVIEW

    Write Your Own Review

    You're reviewing: TrippLite ISOBLOK2-0

    How do you rate this product? *

      1 star 2 stars 3 stars 4 stars 5 stars
    Quality

    Make An Offer

    We are often running unadvertised sale prices, rebates & special offers. We invite you to make a reasonable counter-offer at any time for any item. Who knows? - this may be your lucky day! We'll do our best to help you any way we can.