Inverters

TrippLite APS2012SW

$1,512.00

In stock

SKU: TPT0011


The TrippLite APS2012SW ships factory direct to your door.

Details

  • 12V DC or 120V AC input; 120V, 50/60 Hz output (hardwired)
  • 2000 watts continuous output, 4000 watts peak output
  • Selectable 6/60 amp wet/dry cell battery charger
  • Pure sine wave output
  • Quiet, high efficiency operation, high surge capacity and low idle current
  • Seamless transfer switching
  • PowerVerter APS 2000W 12VDC 120V Inverter/Charger with Pure Sine Wave Output, Hardwired
  • OUTPUT

    Frequency Compatibility50 / 60 Hz
    Output ReceptaclesHardwire
    Output (Watts)2000
    Continuous Output Capacity (Watts)2000
    Peak Output Capacity (Watts)4000
    Output Nominal Voltage120V
    Output Voltage RegulationLINE POWER (AC): Maintains 120V nominal sine wave output from line power source. INVERTER POWER (AC): Maintains sine wave output voltage of 120 VAC (+/-5%).
    Output Frequency Regulation50/60 Hz (+/- 0.3 Hz)
    Overload ProtectionIncludes 15A input breaker dedicated to the charging system and 15A output breaker for AC output loads

    INPUT

    Nominal Input Voltage(s) Supported120V AC
    Recommended Electrical ServiceDC INPUT: Requires 12VDC input source capable of delivering 250A for the required duration (when used at full continuous capacity - DC requirements increase during OverPower and DoubleBoost operation). For automotive applications, professional hardwire installation with 400A minimum battery system fusing is recommended.
    Maximum Input Amps / WattsDC INPUT: Full continuous load - 250A at 12VDC. AC INPUT: 27 amps at 120VAC with full inverter and charger load (8.7A max charger-only / combined input load to support charger and AC output is automatically controllable to 66%-33%-0% based on AC output loading using the charger limiting set points - see manual for setting instructions)
    Input Connection TypeDC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: Hardwire via built in junction box with cover plate
    Voltage Compatibility (VAC)120
    Voltage Compatibility (VDC)12
    1. Be the first to review this product

    WRITE YOUR REVIEW

    Write Your Own Review

    You're reviewing: TrippLite APS2012SW

    How do you rate this product? *

      1 star 2 stars 3 stars 4 stars 5 stars
    Quality

    Features

    Details

  • 12V DC or 120V AC input; 120V, 50/60 Hz output (hardwired)
  • 2000 watts continuous output, 4000 watts peak output
  • Selectable 6/60 amp wet/dry cell battery charger
  • Pure sine wave output
  • Quiet, high efficiency operation, high surge capacity and low idle current
  • Seamless transfer switching
  • PowerVerter APS 2000W 12VDC 120V Inverter/Charger with Pure Sine Wave Output, Hardwired
  • OUTPUT

    Frequency Compatibility50 / 60 Hz
    Output ReceptaclesHardwire
    Output (Watts)2000
    Continuous Output Capacity (Watts)2000
    Peak Output Capacity (Watts)4000
    Output Nominal Voltage120V
    Output Voltage RegulationLINE POWER (AC): Maintains 120V nominal sine wave output from line power source. INVERTER POWER (AC): Maintains sine wave output voltage of 120 VAC (+/-5%).
    Output Frequency Regulation50/60 Hz (+/- 0.3 Hz)
    Overload ProtectionIncludes 15A input breaker dedicated to the charging system and 15A output breaker for AC output loads

    INPUT

    Nominal Input Voltage(s) Supported120V AC
    Recommended Electrical ServiceDC INPUT: Requires 12VDC input source capable of delivering 250A for the required duration (when used at full continuous capacity - DC requirements increase during OverPower and DoubleBoost operation). For automotive applications, professional hardwire installation with 400A minimum battery system fusing is recommended.
    Maximum Input Amps / WattsDC INPUT: Full continuous load - 250A at 12VDC. AC INPUT: 27 amps at 120VAC with full inverter and charger load (8.7A max charger-only / combined input load to support charger and AC output is automatically controllable to 66%-33%-0% based on AC output loading using the charger limiting set points - see manual for setting instructions)
    Input Connection TypeDC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: Hardwire via built in junction box with cover plate
    Voltage Compatibility (VAC)120
    Voltage Compatibility (VDC)12
  • Reviews

    1. Be the first to review this product

    WRITE YOUR REVIEW

    Write Your Own Review

    You're reviewing: TrippLite APS2012SW

    How do you rate this product? *

      1 star 2 stars 3 stars 4 stars 5 stars
    Quality

    Make An Offer

    We are often running unadvertised sale prices, rebates & special offers. We invite you to make a reasonable counter-offer at any time for any item. Who knows? - this may be your lucky day! We'll do our best to help you any way we can.