24V DC or 230V AC input; 230V, 50 Hz output (hardwired)2400 watts continuous, 3600 watts OverPower and 4800 watts DoubleBoost inverter output (see specifications)3 stage, 30 amp selectable wet/dry cell battery chargerAuto Transfer Switching option for battery backup / UPS operationReliability enhanced large-transformer design with protected DC and AC wiring terminalsPowerVerter APS INT 2400W 24VDC 230V Inverter/Charger with Auto Transfer Switching, Hardwired
OUTPUT Frequency Compatibility 50 Hz Output Receptacles Hardwire Output (Watts) 2400 Continuous Output Capacity (Watts) 2400 Peak Output Capacity (Watts) 4800 Output Nominal Voltage 230V Output Voltage Regulation LINE POWER (AC): Maintains 230V nominal sine wave output from line power source. INVERTER POWER (AC): Maintains PWM sine wave output voltage of 230 VAC (+/-5%). Output Frequency Regulation 50 Hz (+/- 0.3 Hz) Overload Protection Includes 10A input breaker dedicated to the charging system and 15A output breaker for AC output loads.
INPUT Nominal Input Voltage(s) Supported 230V AC Recommended Electrical Service DC INPUT: Requires 24VDC input source capable of delivering 112A for the required duration (when used at full continuous capacity - DC requirements increase during OverPower and DoubleBoost operation). For automotive applications, professional hardwire installation with 300A minimum battery system fusing is recommended. Maximum Input Amps / Watts DC INPUT: Full continuous load - 112A at 24VDC. AC INPUT: 17 amps at 230VAC with full inverter and charger load (7A max charger-only / combined input load to support charger and AC output is automatically controllable to 66%-33%-0% based on AC output loading using the charger limiting set points - see manual for setting instructions) Input Connection Type DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: Hardwire via built in junction box with cover plate Voltage Compatibility (VAC) 230 Voltage Compatibility (VDC) 24