Pressure Washers

Mi-T-M 1500 PSI Electric Direct Drive Hot Water HSE-1502-0MG10

$4,880.00

In stock

SKU: MTM0544


The Mi-T-M 1500 PSI Electric Direct Drive Hot Water HSE-1502-0MG10 ships factory direct to your door.

Details

Clean Pure Sine Wave output

  • 12V DC or 230V AC input; 230V, 50 Hz output (hardwired)
  • 1000 watts continuous output, 2000 watts peak output
  • Selectable 4/40 amp wet/dry cell battery charger
  • Quiet, high efficiency operation, high surge capacity and low idle current
  • Seamless transfer switching
  • PowerVerter APS INT 1000W 12VDC 230V Inverter/Charger with Pure Sine Wave Output, Hardwired
  • OUTPUT

  • Frequency Compatibility 50 Hz
  • Output Receptacles Hardwire
  • Output (Watts) 1000
  • Continuous Output Capacity (Watts) 1000
  • Peak Output Capacity (Watts) 2000
  • Output Nominal Voltage 230V
  • Output Voltage Regulation Nominal 230v +/- 5% until LBW. Peak coltage 360v
  • Output Frequency Regulation 50/60 Hz (+/- 0.5 Hz)
  • Overload Protection Includes 15A input breaker dedicated to the charging system and 15A output breaker for AC output loads
  • INPUT

  • Nominal Input Voltage(s) Supported 230V AC
  • Recommended Electrical Service DC INPUT: Requires 12VDC input source capable of delivering 240A for the required duration (when used at full continuous capacity - DC requirements increase during OverPower and DoubleBoost operation). For automotive applications, professional hardwire installation with 400A minimum battery system fusing is recommended.
  • Maximum Input Amps / Watts DC INPUT: Full continuous load - 240A at 12VDC. AC INPUT: 17 amps at 230VAC with full inverter and charger load (8.7A max charger-only / combined input load to support charger and AC output is automatically controllable to 66%-33%-0% based on AC output loading using the charger limiting set points - see manual for setting instructions)
  • Input Connection Type DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: Hardwire via built in junction box with cover plate
  • Voltage Compatibility (VAC) 230
  • Voltage Compatibility (VDC) 12
    1. Be the first to review this product

    WRITE YOUR REVIEW

    Write Your Own Review

    You're reviewing: Mi-T-M 1500 PSI Electric Direct Drive Hot Water HSE-1502-0MG10

    How do you rate this product? *

      1 star 2 stars 3 stars 4 stars 5 stars
    Quality

    Features

    Details

    Clean Pure Sine Wave output

  • 12V DC or 230V AC input; 230V, 50 Hz output (hardwired)
  • 1000 watts continuous output, 2000 watts peak output
  • Selectable 4/40 amp wet/dry cell battery charger
  • Quiet, high efficiency operation, high surge capacity and low idle current
  • Seamless transfer switching
  • PowerVerter APS INT 1000W 12VDC 230V Inverter/Charger with Pure Sine Wave Output, Hardwired
  • OUTPUT

  • Frequency Compatibility 50 Hz
  • Output Receptacles Hardwire
  • Output (Watts) 1000
  • Continuous Output Capacity (Watts) 1000
  • Peak Output Capacity (Watts) 2000
  • Output Nominal Voltage 230V
  • Output Voltage Regulation Nominal 230v +/- 5% until LBW. Peak coltage 360v
  • Output Frequency Regulation 50/60 Hz (+/- 0.5 Hz)
  • Overload Protection Includes 15A input breaker dedicated to the charging system and 15A output breaker for AC output loads
  • INPUT

  • Nominal Input Voltage(s) Supported 230V AC
  • Recommended Electrical Service DC INPUT: Requires 12VDC input source capable of delivering 240A for the required duration (when used at full continuous capacity - DC requirements increase during OverPower and DoubleBoost operation). For automotive applications, professional hardwire installation with 400A minimum battery system fusing is recommended.
  • Maximum Input Amps / Watts DC INPUT: Full continuous load - 240A at 12VDC. AC INPUT: 17 amps at 230VAC with full inverter and charger load (8.7A max charger-only / combined input load to support charger and AC output is automatically controllable to 66%-33%-0% based on AC output loading using the charger limiting set points - see manual for setting instructions)
  • Input Connection Type DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: Hardwire via built in junction box with cover plate
  • Voltage Compatibility (VAC) 230
  • Voltage Compatibility (VDC) 12
  • Reviews

    1. Be the first to review this product

    WRITE YOUR REVIEW

    Write Your Own Review

    You're reviewing: Mi-T-M 1500 PSI Electric Direct Drive Hot Water HSE-1502-0MG10

    How do you rate this product? *

      1 star 2 stars 3 stars 4 stars 5 stars
    Quality

    Make An Offer

    We are often running unadvertised sale prices, rebates & special offers. We invite you to make a reasonable counter-offer at any time for any item. Who knows? - this may be your lucky day! We'll do our best to help you any way we can.