backup generators

 You are here :  Home  >  Generators  >  Standby Generators  >  Industrial Standby
 
 
Gillette (LP/ Natural Gas) 100KW Standby Generator: SP-1000 Industrial Standby
List Price:$37,625.00
You Save:-14,147.00
Your Cost:$23,478.00

Gillette (LP/ Natural Gas) 100KW Standby Generator: SP-1000 - Industrial Standby
Click Image to Enlarge
   
Email to Friend Bookmark Page
View Similar Models
Description
3-phase available as well

We realize these Standby purchases are major purchases, and after reviewing the attached specs, please feel free to call to discuss suggessted accessories, price quotations, and any other questions you may have with regards to these systems. Thank You!

SP Series: When normal power fails, SENTRY-PRO automatically starts and supplies emergency voltage to your selected loads through an automatic transfer switch. When normal power returns, the generator automatically shuts down and transfers the load from the generator power, back to normal power. The total operation is automatic, meaning no operator needs to be present.

Maximum KW @ Single Phase (LPG/NG): 103.0/ 100.0
Standby KW @ Single Phase (LPG/ NG): 94.0/ 92.0
Stanbby Amps @ 120 Volt (LPG/ NG): 784/ 766
Standby Amps @ 240 Volt (LPG/ NG): 392/ 383

Engine Specs
Type: 8.1L General Motors Vortec
Engine Induction System: Naturally Aspirated
Engine HP Max Rating (LPG/ NG): 161hp/ 148hp
Engine Cubic In. Displ. (Liters): 496 (8)
Engine Cylanders: 8
Engine Lubrication: Full Pressure Oil Lubrication & additional Spin-off replacement oil filter
Industrial Muffler: Standard
Fuel Use @100% Load (ft3./hr) LPG/NG: 511/ 1164
Fuel Use @ 75% Load: 400/ 895
Engine Alternator Output: 70 Amps for charging w/ max amp output @ 12 Volts DC

Generator Regulation
All Models: +/-1% Voltage Regulation
Frequency (Speed): All Models +/- 1% frequency regulation w/ electronic governor system
Engine Cooling: Liquid cooling w/ pusher fan & 125F radiator
Protection Controls: Shutdown For: low oil, high-temp, overspeed, overcrank
Sentinel 111: Digital Controller, programmable microprocessor, LCD metering of generatot & engine functions
"Kleen Power": All Models: Max of 4% distortion on generated Sine Wave
Motor Start (LPG/ NG): 60hp/ 57hp
Batteries Requires: 12 VDC, 840 CCA, 70 Amp/hr

Products availiable in 3 enclosure styles (Prices will vary):
Super-Silent
Standard Enclosure
Open Set


Please Note: Advertised pricing is for the "Standard" housing option; call us for "Open Set" and "Super-Silent" price quotes.

(LP/ Natural Gas) 100KW Standby Generator: SP-1000 Features:
• CONTROL PANEL: Large and spacious for easier installation connections. Panel door is lockable.
• MICROPROCESSOR: This digital controller monitors normal utility power constantly = 24x7 attention
• HOUSING: Rust proofed steel enclosure with weather and sound protection, easy service access.
• MUFFLER: Mufflers are used for additional silencing = Super Quiet Service
• INTERIOR AIR DUCTS: Clean fresh air is ducted into the housing.
(LP/ Natural Gas) 100KW Standby Generator: SP-1000 Complete Specifications (Compare Specifications with Similar Equipment)
Engine HP 161hp
N. Gas KW/Amps 92/766-383
LP Gas KW/Amps 94/784-392
Fuel Type LP Gas or Natural Gas
Displacement/ Type 496 cu.in.
Voltage 120/240V
Engine Type 8.1L GM Vortec
Weight 2310 lb
Dimension (H x L x W) 42 X 78 X 44 in
Accessories/Supplies
Not all of our products are listed online, please phone us if you are looking for something in particular. 1-800-541-0616
Warranty




GIL-SP1000

Privacy Policy  |  Terms and Conditions  |  Comments  |  Testimonials  |  Company Profile  |  Guaranteed Privacy and Security  |  Help and Services  |  Link Exchange