|
Tripp Lite's APS2448 3-function DC-to-AC inverter with auto line-to-battery transfer and integrated charging system serves as a standalone 48V inverter or an extended run UPS.
This unit supplies up to 2400 watts of continuous 120V AC power from a 48V DC bus or battery set.
When optional-use hardwire input AC cable is energized, commercial power passes through to connected equipment and the battery set is recharged via 3 stage, 30 amp charging system.
In UPS mode, the APS system responds to blackouts and brownouts with an uninterrupted transfer to battery-derived AC output.
Includes:
Set of high current DC input terminals for simple installation (user supplies DC source and cabling).
Reliable large transformer design with efficient PWM sine wave output and frequency control powers resistive electronic loads or large inductive motors, compressors and other items with high current needs on startup.
Supports an unlimited amount of runtime with any number of user-supplied batteries connected.
Highly adaptable to a variety of applications and site conditions with adjustable charger settings for wet / gel battery types and selectable line to battery power transfer voltages.
APS2448UL Features:
• 2400 watts continuous output power; provides up to twice this rating for momentary startup of inductive loads
• Includes hardwire AC input and auto-transfer to enable battery charging and automatic UPS support for blackouts & brownouts
• Functions as a 48V standalone AC power source or an extended run UPS system
• 6 diagnostic LEDs indicate AC present, on battery, overload, & battery voltage level (high, medium, & low)
• Switch allows user to select between off, auto-invert and charge-only settings
• Resettable circuit breaker protects APS against system overload
• Advanced 30 amp, 3-stage battery charger and selector switch for gel or wet cell batteries
• Converts 48 volt DC to 120 volt AC
• Hardwire input and output connections supported, DC input terminals for 48V battery connection
• Runtime is dependent upon site supported 48V DC bus or by the size and number of user-supplied batteries 48 volt configuration
|
|
|
| Input Voltage (DC Volts) |
48 |
|
| Output Voltage (AC Volts) |
120 |
|
|
| Continuous Output Power (watts) |
2400 |
|
| Peak Surge Output Power (watts) |
4800 |
|
| Outlet Type / Qty. |
Hardwire |
|
| DC Input Connection |
Nut and bolt positive / negative DC connectors |
|
|
| Dimension (H x L x W) |
7 X
16 X
9
in
|
|
|
|
| Not all of our products are listed online, please phone us if you are looking for something in particular. 1-800-541-0616 |
|
TRP0005-APS2448UL
|
Description