|
Tripp Lite's EMS1250UL inverter with integrated charging system provides automatic, uninterruptible DC-to-AC power for critical on-board equipment.
Ideal for installation by ambulance/EMS vehicle manufacturers, dealer or EMS service for OEM, replacements and upgrades.
Supplies up to 1250 watts of continuous 120V AC power to 2 AC outlets from any 12V battery or automotive DC source. When AC cable is connected to a shore power source, commercial power passes through to connected equipment and the battery set is recharged via 3 stage, 14/55 amp selectable charging system.
This unit can also function as a UPS system, responding to blackouts and brownouts with an uninterrupted transfer to battery-derived AC output. Convenient Anderson DC input quick connector on the unit with extra Anderson DC input connector included in the box (user supplies batteries and cabling). Reliable large transformer design with efficient PWM sine wave output and frequency control powers resistive electronic loads or large inductive motors, compressors and other items with high current needs on startup.
Supports an unlimited amount of runtime with any number of user-supplied batteries connected. Highly adaptable to a variety of applications and site conditions with adjustable charger settings for wet / gel battery types and selectable line to battery power transfer voltages. Includes AC input surge suppression.
Includes hospital grade plug and outlets with GFI (ground fault interrupter) protection. TUV tested to UL458 (mobile inverter) and CAN/CSA-C22.2 No. 107.1-01. Also meets KKK-A-1822.
EMS1250 Features:
• TUV tested to UL458 and CAN/CSA-C22.2 No. 107.1-01. Also meets KKK-A-1822.
• 1250 watts continuous output power; provides up to twice this rating for momentary startup of inductive loads
• Functions as an emergency vehicle inverter, extended run UPS system or standalone power source
• Included remote switch can be linked in a daisychain with a second remote switch (sold separately) for remote operation from multiple locations. Multiple mounting options include recess panel mount or below dash. Ignition interlock feature can shut down unit when engine is off, ending worries of accidental battery drain
• Coated internal circuit boards offer continuous operation in humid environments (0-95%, non condensing)
• Configuration switches to allow the user to select the low voltage for the unit to automatically transfer from AC power to battery backup
• 6 diagnostic LEDs indicate AC present, on battery, overload, & battery voltage level (high, medium, & low)
• Switch allows user to select between off, auto-invert and charge-only settings
• Advanced 14/55 amp selectable, 3-stage battery charger and selector switch for gel or wet cell batteries
• Converts 12V DC to 120V AC
• 2 hospital-grade, GFCI protected outlets; 3-ft. AC power cord with hospital grade plug; Two 175A rated Anderson DC input connectors (1 on the unit and 1 included in the box) for 12V battery quick connection for use with user-supplied cables
• Battery runtime is dependent upon the size and number of user-supplied 12-volt batteries used
|
|
|
| Input Voltage (DC Volts) |
12 |
|
| Output Voltage (AC Volts) |
120 |
|
|
| Continuous Output Power (watts) |
1000 |
|
| Peak Surge Output Power (watts) |
2000 |
|
| Outlet Type / Qty. |
2 - NEMA5-15R |
|
| DC Input Connection |
Anderson DC input |
|
|
| Dimension (H x L x W) |
8 X
17 X
9
in
|
|
|
|
| Not all of our products are listed online, please phone us if you are looking for something in particular. 1-800-541-0616 |
|
TRP0019-EMS1250
|
Description